進口閘閥的分類以及結構特點
按閥桿的構造進口閘閥的分類 1) 明桿閘閥:閥桿螺母在閥蓋或支架上,開閉閘板時,用旋轉閥桿螺母來實現閥桿的升降。這種結構對閥桿的潤滑有利,開閉程度明顯,因此被廣泛采用。 2) 暗桿閘閥:閥桿螺母在閥體內,與介質直接接觸。開閉閘板時,用旋轉閥桿來實現。這種結構的優點是:閘閥的高度總保持不變,因此安裝空間小,適用于大口徑或對安裝空間受限制的閘閥。此種結構要裝有開閉指示器,以指示開閉程度。這種結構的缺點是:閥桿螺紋不僅無法潤滑,而且直接接受介質侵蝕,容易損壞。美國威盾VTON品牌的進口閘閥的詳細產品有:進口日標閘閥、進口美標波紋管閘閥、進口低溫閘閥,進口氣動刀閘閥,進口刀閘閥,進口美標閘閥,進口鍛鋼閘閥,進口軟密封閘閥,進口保溫閘閥,進口不銹鋼閘閥。
Construct a gate valve by the valve stem 1) rising stem gate valve: the valve stem nut on the valve cover or bracket opening and closing the gate, with a rotating valve stem nut to stem the rise and fall. This structure is beneficial to the valve stem lubrication obvious degree of opening and closing, so widely used. 2) rising stem gate valve: direct contact with the stem nut in the valve body, and media. Opening and closing gate with a rotating stem. The advantage of this structure are: gate valve height remains unchanged, so the installation space, applicable to large diameter gate valve or restricted installation space. Such a structure should be equipped to open and close indicator to indicate the opening and closing degree. The disadvantage of this structure are: the stem threads not only can not be lubricated, but also directly accept the medium erosion, and easily damaged.
上一篇:液位計(磁翻板液位計)的檢測方法
下一篇:試驗機體積應概念
全年征稿/資訊合作
聯系郵箱:[email protected]
免責聲明
- 凡本網注明"來源:智能制造網"的所有作品,版權均屬于智能制造網,轉載請必須注明智能制造網,http://www.lfljgfsj.com。違反者本網將追究相關法律責任。
- 企業發布的公司新聞、技術文章、資料下載等內容,如涉及侵權、違規遭投訴的,一律由發布企業自行承擔責任,本網有權刪除內容并追溯責任。
- 本網轉載并注明自其它來源的作品,目的在于傳遞更多信息,并不代表本網贊同其觀點或證實其內容的真實性,不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時,必須保留本網注明的作品來源,并自負版權等法律責任。
- 如涉及作品內容、版權等問題,請在作品發表之日起一周內與本網聯系,否則視為放棄相關權利。
2025第十一屆中國國際機電產品交易會 暨先進制造業博覽會
展會城市:合肥市展會時間:2025-09-20