騰達試驗儀器廠：

　　厚漆膩子稠度測定儀是膩子檢測儀器，用來測定厚漆或膩子之稀稠度,簡便、直觀、準確。

　　Thick paint putty consistency measurement is the best putty detection instrument for determining the thin consistency of thick paint or putty,which is simple,intuitive and accurate.

　　厚漆膩子稠度測定儀結構及工作原理:.

　　取定量體積(20ml)的榮計達儀器試樣,放在兩玻璃板之間,借助重量一定的砝碼壓力,經過一定的時間,視試樣被壓的流展程度,擴散之直徑來表示其稠度,若流展程度差,擴散直徑小的則說明其稠度高,反之,則說明其稠度低,是對比不同試樣榮計達儀器稀稠度的有效識別工具。

　　Thick paint putty consistency tester structure and working principle:.

　　Take a quantitative volume(20ml)of the Rong Jida instrument sample and place it between two glass plates.With a certain weight pressure,after a certain period of time,it can be expressed according to the degree of spreading of the sample and the diameter of the diffusion.Its consistency,if the degree of spread is poor,ａnd the diffusion diameter is small,it means that it has a high consistency;otherwise,it means that its consistency is low,ａnd it is an effective identification tool for comparing the thin consistency of different samples.

　　QCT厚漆膩子稠度測定儀規格及使用要求:

　　1、唧筒內徑為29.7mm,深度為29mm,保證唧筒容積為20.07ml。

　　2、上玻璃壓板為200×200mm,厚度為5mm,板上刻有直徑5-16cm的圓圈。

　　3、砝碼重量為2000g。

　　4、使用環境溫度為25±1℃,相對濕度60%―70%。

　　5、試驗用漆刀、秒表(自備)。

　　QCT thick paint putty consistency tester specifications and use requirements:

　　1.The inner diameter of the drum is 29.7mm,the depth is 29mm,ａnd the drum volume is guaranteed to be 20.07ml.

　　2.The upper glass pressing plate is 200×200mm,the thickness is 5mm,ａnd a circle with a diameter of 5-16cm is engraved on the plate.

　　3.The weight is 2000g.

　　4.The operating environment temperature is 25±1℃,ａnd the relative humidity is 60%-70%.

　　5.Lacquer knife and stopwatch for test(provided).